Menu
Polypropylene PPB-M09 (EPC30R)
Specifications
| The copolymerized polypropylene resin produced by Sinopec’s ring pipe process has the advantages of good stability, rigidity, and toughness balance. Used to make industrial products such as car dashboards and interior parts, car bumpers, battery cases, fuel tanks, and daily miscellaneous products such as bottle caps, kitchen utensils, furniture, toys, tool boxes, travel bags, and various packaging containers, etc. |
| Item | Index | Unit | Test method | ||
| Melt mass flow rate(MFR) Standard value | 8.5 | g/10min | GB/T 3682.1-2018 | ||
| Melt mass flow rate(MFR) Deviation value | ±1.0 | g/10min | GB/T 3682.1-2018 | ||
| Tensile yield stress | ≥ 22.0 | Mpa | GB/T 1040.2-2006 | ||
| Flexural modulus(Ef) | ≥ 1000 | Per 1520/cm2 | GB/T 9341-2008 | ||
| Charpy notched impact strenth (23℃) | <40 | KJ/m2 | GB/T 1043.1-2008 | ||
| Heat deflection temperature under load(Tf0.45) | ≥ 80 | ℃ | GB/T 1634.2-2019 | ||
Packing & Storage
| Packing | Packed in cloth bags or polypropylene woven bags lined with plastic film bags, each bag is 25kg. | |||||||
| Storage | Stored in a cool, dry and ventilated warehouse, do not stack in the open air, and do not be exposed to sunlight. | |||||||
| Transportation | Sharp tools such as iron hooks are prohibited during transportation, loading, and unloading. During transportation should be kept clean, dry, and equipped with compartments or clothes. It shall not be mixed with sand, broken metal, coal, glass, etc. during transportation. | |||||||
Free Quote
For samples, pricing, or more information, please call us at 0086 25 51192301 or mail to INFO@ASCENT-PETROCHEM.COM or fill out the following form.
We will respond to you as soon as possible.
Tel: 0086 25 51192301
E-mail: INFO@ASCENT-PETROCHEM.COM
General Information
Chemical & Physical Information
Safety Information
Synthetic Route
Chemical & Physical Information
| Common Names | Polypropylene PPB-M09 (EPC30R) | |||||||
| Structure | (C3H6)n  | |||||||
| CAS No. | 9003-07-0 | Boiling Point (℃) | 120-132 °C | |||||
| Molecular Weight | N/A | Melting Point (℃) | 189 °C(lit.) | |||||
| Appearance | White powder | Density | 0.9 g/mL at 25 °C(lit.) | |||||
| HS Code | 39021000 | Flash Point (ºF) | N/A | |||||
| Solubility | Easily soluble in various organic solvents | LogP | N/A | |||||
Safety Information
| Safety Phrases | N/A | ||
| RIDADR | NONH for all modes of transport | ||
| WGK Germany | 3 | ||
| Hazard Codes | N/A | ||
| RTECS | UD1842000 | ||
| FIRST AID | |||
| Inhalation | If inhaled, move the patient to fresh air. If breathing stops, perform artificial respiration. Consult a doctor. | ||
| Skin | Rinse with soap or plenty of water. Consult a doctor. | ||
| Eyes | Rinse thoroughly with plenty of water for at least 15 minutes and consult a doctor. | ||
| Ingestion | Never give anything by month to an unconsious person. Rinse mouth with water. | ||
Synthetic Route
| With high-purity propylene as the main raw material and ethylene as the copolymer monomer, a highly active catalyst is used to produce polypropylene powder by gas phase reaction at 62℃~80℃ and pressure below 4.0MPa, and then dried, mixed, squeezed, granulated, sieved, and homogenized into polypropylene particles. |
Frequently Asked Questions
About Us
Nutrn Chemical Co.,Limited is a company specializes in the processing and marketing industry chain of petrochem and coal chemical industry, by persistently pushing forward with high-tech and service innovation. We are committed to becoming China’s best diversified chemical company which focusing on technologies and services.
Contact Us